Marlin 1.1.9 firmware for A10M (pre-built, fine-tuned, both with & without 3d touch) by aarli

heliport23
Posts: 5
Joined: Fri Mar 08, 2019 4:51 pm

Re: Marlin 1.1.9 firmware for A10M (pre-built, fine-tuned, both with & without 3d touch) by aarli

Post by heliport23 » Fri Mar 08, 2019 7:39 pm

Hi vert,

thank you for the information.

BR

Chingly
Posts: 1
Joined: Sun Mar 10, 2019 12:32 pm

Re: Marlin 1.1.9 firmware for A10M (pre-built, fine-tuned, both with & without 3d touch) by aarli

Post by Chingly » Sun Mar 10, 2019 12:33 pm

Where is the config_adv.h file in your build? cant find it anywhere on your github. Also, can you add filament runout?

bernte_one
Posts: 25
Joined: Fri Aug 24, 2018 4:39 pm

Re: Marlin 1.1.9 firmware for A10M (pre-built, fine-tuned, both with & without 3d touch) by aarli

Post by bernte_one » Wed Mar 13, 2019 10:46 pm

:roll: just take modified firmware by vert

put the right config... h file for your printer into the marlin directory before flashing

and enjoy

good work vert

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Marlin 1.1.9 firmware for A10M (pre-built, fine-tuned, both with & without 3d touch) by aarli

Post by William » Thu Mar 14, 2019 10:25 am

This post has been locked.Try to use the default fw or the fw from vert.
viewtopic.php?f=92&t=68228
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Locked