i3 Pro C heat bed stopped heating/temping

Post Reply
robmason
Posts: 2
Joined: Fri Apr 07, 2017 5:25 am

i3 Pro C heat bed stopped heating/temping

Post by robmason » Tue Apr 18, 2017 4:39 am

Hi

Finally managed to resolve extruder issues - now have a new issue with the bed.

On start-up the bed is showing as 0/0 whereas it previously showed room temp and heated up ok. Now no temp recorded and no heating going on.

I switched the thermistor from Ext 2 to heatbed and temp showed correctly (room temp)

Any ideas?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: i3 Pro C heat bed stopped heating/temping

Post by William » Fri Apr 21, 2017 2:43 pm

-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply