A20T 3D Touch Problem

Post Reply
ajoreis
Posts: 4
Joined: Sun May 01, 2016 6:14 pm

A20T 3D Touch Problem

Post by ajoreis » Sat Feb 19, 2022 1:20 am

Hello,
unfortunately I have a small problem with my A20T, I bought and connected a 3D Touch, then I downloaded the appropriate firmware and loaded it onto the board. The 3D Touch is also recognized, but I can't create a Z offset because I can't determine a minus value for the Z axis.
I can't set a Move Z: -000.2 etc. in the menu.
It stops at +000.0.
What do I have to do so that I can determine the T offset?

Thank you very much

Kind regards
Olaf Reis

Morgest
Posts: 12
Joined: Thu Oct 25, 2018 6:01 pm

Re: A20T 3D Touch Problem

Post by Morgest » Thu Apr 21, 2022 6:01 pm

Well, there are so many articles online about the study material to read so i was reading this which could help me to find which could be a better option such as https://paperspout.net/ cheap essay writing service that is available for anybody who might need it to make things work

Post Reply