New A20 has a weird Extruder (Nozzle too far in)

Post Reply
Iczer
Posts: 1
Joined: Tue Jun 30, 2020 7:53 pm

New A20 has a weird Extruder (Nozzle too far in)

Post by Iczer » Tue Jun 30, 2020 7:59 pm

Hi,

I just got a new A20 and when I tried to level the bed I saw that, quality control messed up yet again.
The Funnel of the cooling fan extends way past the nozzle. Almost an entire cm.

See picture:
https://www.dropbox.com/s/wrydpr52nqf2u ... 5.jpg?dl=0

What should I do now, send the printer back or have support send a replacement?

This is rather frustrating since it's my 2nd Geeetech Printer that won't print out of the box.

Post Reply