Geetech A20 don't know version

Post Reply
JWKillTimeFPV
Posts: 1
Joined: Tue Dec 29, 2020 5:18 am

Geetech A20 don't know version

Post by JWKillTimeFPV » Tue Dec 29, 2020 5:47 am

Hi i've got the A20 its meant to be the GT2560 V4.1B board but i have doubts that it is. I bought it off Amazon UK.
When i go into the settings & gooto PRINTER INFO then BOARD it says
GT2560 V4.0
Baud: 250000
FW Ver: V2.0
HW Ver: V4.10
Protocol: 1.0

Can anyone please tell me if i have the V4.1B board & if i can run the BL-Touch on my printer & if so how do i set it up?
This would all be a great help to get sorted out.

Thanks for any help anyone can give.

logic128
Posts: 5
Joined: Fri Jan 01, 2021 6:37 am

Re: Geetech A20 don't know version

Post by logic128 » Fri Jan 01, 2021 6:43 am

if your printer came with the mount for the bltouch, it supports it. there should be 3+2 unoccupied pins on the breakout board on the back of the hotend assembly
can attatch pictures if needed

Post Reply