FIRMWARE - Marlin or GEEETECH?

Post Reply
Princy557
Posts: 6
Joined: Thu Dec 16, 2021 12:19 am

FIRMWARE - Marlin or GEEETECH?

Post by Princy557 » Sun Feb 13, 2022 11:09 pm

Hi
I'm not quite getting the hang of this 3D printer. There seems to be two different firmware to use. GEEETECH or MERLIN

There are so many different versions of each.

WHICH one should I be running on my A20T printer?

I seem to have had problems since day 1. Waited weeks for a replacement motherboard (Z-axis would not go downwards only upwards).
Since that arrived I have been able to print quite a few single colour items. But still can't get it to print multicolour jobs.
Having said that GT did send me a G-Code file which printed very well indeed.

I think I need advice as to what firmware is better for use in the A20T and where I get it from for either.
Advice, please? ;)

Regards

Princy557
Posts: 6
Joined: Thu Dec 16, 2021 12:19 am

Re: FIRMWARE - Marlin or GEEETECH?

Post by Princy557 » Wed Feb 16, 2022 7:52 pm

Thanks for the reply.

Is there a .hex file for the A20T somewhere?

My knowledge and abilities in programming etc are limited now.
Regards

karole40
Posts: 3
Joined: Wed Oct 06, 2021 9:01 am

Re: FIRMWARE - Marlin or GEEETECH?

Post by karole40 » Sat Mar 05, 2022 10:46 pm

Voici 2 liens utile pour toi

Marlin 2.0.xxx pour A20T

https://github.com/Vertabreak/Vert-Marlin/tree/A20T


fichier Hex Marlin 1.1.8

https://www.geeetech.com/download.html?download_id=45

Post Reply