Need help with levelling my geeetech a20!!

Post Reply
YekinKebo
Posts: 3
Joined: Thu Sep 09, 2021 11:25 am

Need help with levelling my geeetech a20!!

Post by YekinKebo » Mon Dec 13, 2021 5:30 am

Hey guys, so I'm new to 3D printing. I've got my hands on a geeetech a20 and after assembling the printer with the help of an awful manual, it was almost ready. To level the printer, the manual told me to fasten all four feather screws that hold up the hotbed. After I did that, I turned the printer on and pressed "auto home". The printer automatically moved the nozzle to the bottom left nearside corner. But here's my problem: Since the Z axes is already down so much that the Z POS Sensor doesn't allow any further movement down, the nozzle is about 5-10mm above the hotbed. Does anyone know a fix for that? I think moving it up with the feather screws will mess up the evenness of the hotbed.https://9apps.ooo/

OrazioGiunta
Posts: 10
Joined: Wed Jan 13, 2021 11:53 pm

Re: Need help with levelling my geeetech a20!!

Post by OrazioGiunta » Wed Dec 29, 2021 8:28 pm

You should buy a geetech autolevelling sensor as soon as possibile in order to avoid levelling problem, be sure to update your printer after the installation on BL 3d touch. Let me know

Post Reply