A20 Augo home

Post Reply
Jvinblad
Posts: 5
Joined: Thu Jul 09, 2020 1:20 pm

A20 Augo home

Post by Jvinblad » Wed Nov 18, 2020 11:02 am

I replaced my mother board on my A20. After that the home position ks messed up the y coordinate bottoms out and so does x, z coordinate is about 80 mm above the build plate. How do I adjust the home position? I did upgrade to latest firmware.

User avatar
Bowers
Posts: 1
Joined: Fri May 14, 2021 2:09 pm

Re: A20 Augo home

Post by Bowers » Fri May 14, 2021 2:39 pm

Hello,
I've the same situation with the home position. I bought my A20 with a new upgraded motherboard, but now I've issues with the coordinates and can't adjust anything correctly. Who can share some useful tips or recommendations?


M1 Mac, A20 user writer

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: A20 Augo home

Post by Admin » Mon May 17, 2021 2:46 pm

Hello, if you have changed the motherboard, have you tried to update the firmware? You can update the firmware on the official website of geeetech:
http://www.geeetech.com/

Post Reply