Geeetech

I was having an issue with filament oozing from the nozzle base (not the tip where filament comes out). I tried replacing the nozzle but it would not tighten. Figuring the threads were stripped on the hot end I replaced the entire extruder. During the first print with brand new hot end and new nozzl...

My A30M was in the middle of a print and powered off. I can't get it to power back on. I tried a different outlet, and tried replacing the power supply but still no power to the printer. Could it be as simple as the fuse or power cord?

Hope you got your issues with the temp error resolved. I'm having quite the same issue. I got a new hot end (nozzle couldn't be removed from old one), installed it, but getting a temp error code (temp also shows as -15 C whether I have the 12-pin cable plugged in or not). What was your fix? Did you ...

I had to re-assemble the hot end extruder and now after re-assembly and connecting the drive belt, it appears to be a little wobbly. I don't recall it being like this before or not. Does anyone know if this is normal? It seems like it shouldn't be. Anyone have some tips to make it not wobble? I've t...