Geeetech

William, there is no such configuration file/profile for cura available on the website. There is only a profile for repetier. https://www.geeetech.com/download.html?download_id=44

It would be extremely helpful if geeetech would provide its users with a cura profile...

Please advise.

William, your suggestions are not very helpful. All of your suggestion were implemented before I even attempted to slice my first part using repetier....the g-code still defaults to E0 regardless which extruder is chosen. What about Cura? All of my settings are dialed in there, I would much rather g...

No one has had this issue?

Did anyone ever find a solution to this problem, I am having the same issue. Also could someone advise on how they changed the voltage and acceleration settings so I can mess with that myself. In order to adjust the voltage you need to adjust the screw on the driver. To measure the voltage probe th...

I had the same Y-axis shifting issue. I had lowered my X and Y axis driver voltage because my Y axis driver blew out due to Geeetech not including heatsinks...thanks guys... :evil: :evil: :evil: :evil: :evil: I adjusted the voltage back up to 1.25v once I had heatsinks and it solved the problem for ...

I would like to have the ability to select which extruder I use for each print. For some reason, no matter which extruder I specify for the print in cura or repetier, my print always uses E0 extruder, regardless if I choose E1 or E0 extruder. I can manually feed each extruder with no issue. The only...

Found the link for anyone else that reads this post: https://www.geeetech.com/mylar-sticker- ... -1112.html

Geeetech, are you guys going to sell a replacement bed surface for the superplate? Mine has PLA residue stuck to it all over the place already.

Has anyone gotten 3d touch to work correctly? Just upgraded firmware to V1.01.01 and the auto leveling screen still does not allow me to select 3D touch, still stuck on "CAS". Also no buttons for push-pin up/down or alarm release. Edit: Turns out you have to turn auto leveling off before selecting 3...