Search found 14 matches

by Deadeye
Thu Jan 14, 2021 3:23 pm
Forum: Feedback&Suggestion
Topic: What's happening with geeetech.
Replies: 3
Views: 5894

Re: What's happening with geeetech.

I’m also not seeing any response to my question on whether I can convert my A30M to a A30 Pro. I wouldn’t be surprised if they have closed shop.
by Deadeye
Mon Jan 11, 2021 2:20 pm
Forum: A30M
Topic: Convert A30M to A30 Pro
Replies: 4
Views: 12364

Convert A30M to A30 Pro

After not being able to resolve my stringing issues after having the A30M for over a year, as I think the issue is with having ooze issues with the dual filament hot end, I'm considering whether I can convert the A30M to a A30 Pro by replacing the head and updating the control board firmware to the ...
by Deadeye
Mon Sep 07, 2020 8:29 pm
Forum: Extruder
Topic: A30M Extruding different lengths between sides for same feed length
Replies: 1
Views: 10235

A30M Extruding different lengths between sides for same feed length

Hi, I have an A30M and I’m trying to calibrate the Filament steps. I have it set to 140 and when I try to extrude 100mm, on E0 it extrudes 90mm and on E1 it extruders 100mm. Any ideas why there is a difference?
by Deadeye
Thu Jul 09, 2020 4:29 pm
Forum: Geeetech A30 Series
Topic: Replacement parts a30m
Replies: 1
Views: 3206

Re: Replacement parts a30m

I’ve ordered this one. Still waiting for it to arrive

AU $51.06 12% Off | 2 in 1 out Y-type remote Hotend Kit For Geeetech A30M 3D Printer With 0.4mm nozzle 1.75mm Filament
https://a.aliexpress.com/_d8YImy6
by Deadeye
Mon Jun 29, 2020 5:10 am
Forum: A30M
Topic: Major clog on hot end
Replies: 5
Views: 18074

Re: Major clog on hot end

How can I buy a set of these copper discs?
by Deadeye
Sun Apr 05, 2020 10:00 am
Forum: A30M
Topic: Major clog on hot end
Replies: 5
Views: 18074

Re: Major clog on hot end

I also had a major clog where I couldn't push anything through the non master filament side, the side I rarely use. Similarly I pull mine apart, but those discs were not in mine. I can see how they would act like valve, though not sure how the liquid filament would get around them. I need to leave f...
by Deadeye
Wed Feb 05, 2020 2:54 pm
Forum: A30M
Topic: A30M and 3D Touch
Replies: 10
Views: 14317

Re: A30M and 3D Touch

I have near given up on trying to get the 3D Touch to work on my A30M. I have had to bend the 3-D touch pin back into shape twice after it collided with the side of the bed. I haven’t been able to find a YouTube that shows the latest A30M auto-level software update and how to configure autoleveling....
by Deadeye
Mon Jan 20, 2020 1:52 pm
Forum: A30M
Topic: TPU not Working with A30M
Replies: 5
Views: 7166

Re: TPU not Working with A30M

Oh ok. So as the A30M uses a Bowden tube and remote extruder from the hot end, it’s really not suitable for printing flexible filiments :|
That’s disappointing
by Deadeye
Mon Jan 20, 2020 12:45 pm
Forum: A30M
Topic: TPU not Working with A30M
Replies: 5
Views: 7166

Re: TPU not Working with A30M

Hi, are you saying I need a Proximal extruder on my A30M to print with flexible filiments?
by Deadeye
Mon Jan 20, 2020 4:32 am
Forum: A30M
Topic: Massiv stringing at A30M
Replies: 12
Views: 15146

Re: Massiv stringing at A30M

I followed a calibration where I printed four 1cm cubes spaced 10mm, 20mm and 40mm apart. I started with a travel speed of 50mm/s and retraction of 0mm. I then printed them increasing the travel speed by 30mm, keeping the retraction at 0mm. Eventually got to 150mm/s and I think this maxed out the sp...