Geeetech

Are you talking about the A30T.. Because I don't think it works for it.. I have done that for all my other printers.. But for this there is not custom firmware yet.. Yes.. there is marlin ready for it.. but you can't use it because there is not the right firmware for the screen... What I'm not unde...

All of them have custom firmware, you have to compile it yourself. It uses marlin, you will need to DL marlin from https://github.com/MarlinFirmware/Marlin and use Visual Studio Code from here https://code.visualstudio.com/. Then edit the Configuration.h and configuration.adv.h. Visual studio has a...

my problem is different.... i have changed all 3 the extruder and i want a new e step value for all 3 the extruders... but when i change it it changes only extruder 0 the other 2 extruders are still with the old value.. so they are not working with my new extruders... Do you have custom firmware? I...

Hi, You can change the E steps/mm, like the picture below, that will change all the extruders. tat''s the firt thing I have done.. but didn't work for me.. I fixed mine setting the flow at 35% and saved wit M500 gcode.. it worked on all the extruders when you change that value only the first extrud...

tat''s the firt thing I have done..
but didn't work for me..
I fixed mine setting the flow at 35% and saved wit M500 gcode.. it worked on all the extruders

The firmware and smarto tool does not allow for each extruder to have unique calibration figures. Certainly a short coming of the printer if folks want to replace one extruder. In reality all three extruders (gearing and motors) have to be exactly the same. If they are not then you may be out of lu...

my problem is different....
i have changed all 3 the extruder and i want a new e step value for all 3 the extruders... but when i change it it changes only extruder 0
the other 2 extruders are still with the old value.. so they are not working with my new extruders...

same problem here... tried everything but nothing seems to work!!!!!
weeee neeed helpppppp!!!!!!